Posts belonging to Category Uncategorized



The Stereo-to-Mono Summing Cable That No One Makes

Photo0019

Have you ever used a stereo-to-mono “Y-cable” or TRS (Tip/Ring/Sleeve)-to-TS(Tip/Sleeve) cable for combining two audio outputs together, or for summing the Left and Right channels from a single stereo output to mono? For example, maybe you wanted to connect the stereo outputs of your computer, CD player, iPod, iPad, Android tablet or phone into a single 1/4″ input channel on an audio mixer. Or maybe you needed to sum a stereo signal to mono for connecting to a single subwoofer. Or maybe you were mixing a song in your home recording studio and needed to check your mixes in mono on a single “grot box”, like the Auratone or one of its clones (Avantone Mix Cube, Behringer Behritone C5A, C50A, etc.). If you’re anything like me, you’ve probably done this, but what you may not know is this: a Y-cable or stereo-to-mono cable used to SPLIT a signal into two outputs is being used properly. A Y-cable used to MIX or COMBINE two signals into one input is being abused, and may even damage your equipment! (more…)

Behringer X-Air XR18: the Future of Live Mixing

xr18_angle

A few months ago, my trusty old analog mixer that I had used since 2008 developed an intermittent short in one of the aux sends. Unfortunately, this was one of only two pre-fader aux sends on this mixer, so I was using it for one of two monitor sends for band rehearsals and live gigs. This board had a total of 4 aux sends, but two of them are post-fader, and are therefore unsuitable for use as a monitor send. (more…)

Welcome to the Silent Sky Studios Blog

Welcome to the Silent Sky Studios Blog. I’ve been writing a series of articles for my recording studio website, and I decided it would be much easier to add new content on a regular basis by publishing these articles in a blog format instead. I hope you enjoy!