I’ve been using a Tascam DR-40 portable recorder for over a year now to record our band reharsals and services each week at church. After each rehearsal, I import the recorded audio into my DAW, export each song as an MP3, and e-mail those MP3’s to the other members of the band so we can evaluate our parts, practice them, and listen to the songs to help commit any new ones to memory. I’ll often do the same thing after our services, just so we can listen back and hear how everything sounded out front during the service. I also want to begin posting the pastor’s sermon each week on the church website, but recording the sermon with the DR-40 has brought some challenges (more on that in just a moment). Continue Reading »

Over the years, I’ve owned a half-dozen drum thrones from different manufacturers, ranging from less expensive budget models on up to some that were considered top-of-the-line when I purchased them. But they’ve all suffered from the same problems: the joint on the bottom of the seat that attaches to the base did not allow me to adjust it to a point where it was comfortable, the seat wasn’t comfortable, the height was difficult to adjust, and when the height was set, it wouldn’t stay set for very long. Continue Reading »

The church where I attend (and play the drums in the worship band) recently remodeled our sanctuary. This included new lights, paint, carpet, and expanding the size of our stage. As part of this project, we also installed an all new sound system. Like many churches of our size, we’ve undergone a fairly recent transition from more traditional piano and organ-based music to a live band with guitars, bass, keyboard, and drums, so the old sound system was woefully inadequate for our current needs. For the new mixing console, we ultimately chose the Behringer X32. And boy, am I glad that we did. It’s been a real answer to our prayers (pun intended)–solving many of the problems and overcoming the limitations of our old analog system. For those of you who might be facing similar issues with the sound system in your church, I’d like to highlight some of the stellar features of the X32 which we have found to be a real God-send (again, pun intended). Continue Reading »

A few months ago, my trusty old analog mixer that I had used since 2008 developed an intermittent short in one of the aux sends. Unfortunately, this was one of only two pre-fader aux sends on this mixer, so I was using it for one of two monitor sends for band rehearsals and live gigs. This board had a total of 4 aux sends, but two of them are post-fader, and are therefore unsuitable for use as a monitor send. Continue Reading »

Over the course of the last several decades, the Shure SM58 has become the de-facto standard vocal microphone for live performances. And for good reason: it’s built tough, reasonably priced, and generally sounds great on just about any voice. With a price tag of around $100, the SM58 may still seem out of the price range of some musicians, tempting them to look for other cheaper alternatives. But in the remainder of this article, I’ll attempt to persuade such frugal buyers to think twice before compromising, and why you should definitely buy the SM58 if you are able. Continue Reading »

In my studio rack, I now have one dual-channel and three 8-channel rackmount mic preamps (for a total of 26 inputs) that I use for recording all of the vocals and instruments. One of the challenges to any session is remembering which mic is connected to which preamp. On more than one occasion, I’ve found myself twiddling a Gain knob to no avail, only to realize that I grabbed the wrong knob by mistake. So the thought occurred to me–wouldn’t it be nice if I could label each preamp channel somehow, so that I could easily see which one I was actually adjusting? Continue Reading »

One of the things I love about recording is the passion that other recording enthusiasts have for it. If you’ve frequented any of the popular recording forums (TapeOp, Gearslutz, Homerecording, etc.), you’ll find some very colorful discussions about what gear is best and how best to use it. Occasionally, I’ll discover that there’s a whole mythology that has developed around a certain recording technique (e.g., the “Recorderman” overhead mic placement on drums) or a certain “best practice” that people either swear by, or swear at. Such is the case with whether or not to “burn-in” new studio monitor speakers. Continue Reading »

Originally released in 1976, the Shure SM7B has become the stuff of recording legend. It was the mic that was used to record the vocals on the best-selling album of all time: Michael Jackson’s Thriller. It’s still the preferred vocal mic in the studio for many famous Rock vocalists. You’d be hard-pressed to find a recording forum without dozens of threads about the SM7B, and how every engineer should own one. The demand for these mics is so great that you’ll pay almost as much for a used one as you would to buy a new one. Continue Reading »

If you’re looking to expand the inputs and/or outputs of your recording interface, and that interface comes equipped with ADAT (also sometimes called “Lightpipe” or “Toslink”) inputs and outputs, look no further than the Behringer Ultragain ADA8000. The ADA8000 is an 8-channel Mic/Line preamp and A/D (Analog-to-Digital) converter. But as a bonus, it’s also an 8-channel D/A (Digital-to-Analog) converter. This comes in handy if you need additional analog outputs from your DAW, like maybe for mixing “out of the box” using an analog console, or if you need additional analog outputs for creating headphone mixes for multiple performers while tracking in the studio. Continue Reading »

I’ve always been somewhat obsessive-compulsive when it comes to setting up my drums. When I get everything set just the way I like it, I want it to stay that way. And when I need to tear down and set up for a gig, it’s always been a challenge to get everything positioned just right. Continue Reading »